Toetoetra:
- haingam-pandeha
- Habe kely
- Fahaverezan'ny fampidirana ambany
Ny fizarazarana hery 3-dalana dia fitaovana ampiasaina betsaka amin'ny rafitra RF sy mikraoba ary manana ireto endri-javatra manaraka ireto: seranana fidirana / famoahana telo. Ny 3-way power dividers/combiner dia manana seranana fidirana telo izay afaka mandray famantarana avy amin'ny loharano samihafa, na mahatratra ny fizarana sy ny fisarahana.
1.Balance sy coherence: Ny famolavolana ny 3-fomba fizarana hery dia mifototra amin'ny fitsipiky ny fifandanjana sy ny firindrana mba hihazonana ny amplitude sy ny dingana toetra ny famantarana fampidirana.
2. Fahombiazan'ny Broadband: Ny fizarana herinaratra 3-fomba matetika dia manana fari-pamokarana midadasika be ary afaka mandrakotra fatra matetika amin'ny rafitra RF sy microwave.
3.Low insertion very: 3-way power dividers/combiners mazàna dia ambany ny insertion very, miantoka ny fatiantoka kely indrindra rehefa alefa ny signal avy amin'ny fidirana mankany amin'ny vokatra.
4. Fandeferana mahery vaika: Satria izy ireo dia natao miaraka amin'ny fampiharana hery avo ao an-tsaina, ny 3-fomba fizarazarana hery / combiners dia amin'ny ankapobeny dia afaka manohitra ny haavon'ny hery ambony tsy misy fahasimbana na fanodinkodinana.
5. Fanamafisana sy fampidirana: Matetika ny mpizara hery 3 amin'ny fomba maoderina dia mampiasa fonosana kely sy teknika fampidirana, ka mahatonga azy ireo ho kely, maivana ary afaka mifandray mafy amin'ny fitaovana RF sy microwave hafa.
1. Ampiasaina amin'ny rafitra antenna mba hizarana ireo famantarana navoakan'ny antenne amin'ny mpandray telo na mihoatra;
2. Ampiasaina amin'ny famatsiana herinaratra, mizara ny herin'ny famantarana fampidiran-dresaka amin'ny lalan'ny famoahana maro, toy ny laharan'ny fanamafisam-pahefana;
3. Ampiasaina amin'ny faritra mixer mba hampifangaroana famantarana fampidirana telo ho famantarana iray mivoaka;
4. Ampiasaina amin'ny rafitra fitsapana, mizara famantarana fampidirana ho fantsona telo mba handrefesana sy fampitahana ny fahombiazan'ny famantarana, toy ny hery, ny dingana ary ny matetika;
5. Ampiasaina amin'ny rafi-radar mba hanomezana famantarana voarain'ny radara ho an'ny mpanadihady telo na mihoatra mba handinihana sy hamaritana ny toerana sy ny hafainganam-pandehan'ny tanjona.
Qualwavedia manome 3-fomba fizarazarana herinaratra / combiners avy amin'ny DC mankany 67GHz, ary ny hery dia hatramin'ny 300W.
Laharan'ny ampahany | Frequency RF(GHz, Min.) | Frequency RF(GHz, Max.) | Hery ho Mpizara(W) | Hery toy ny Combiner(W) | Fatiantoka fampidirana(dB, Max.) | Fitokana-monina(dB, Min.) | Amplitude Balance(± dB, Max.) | Phase Balance(±°, Max.) | VSWR(Max.) | Connectors | Fe-potoana(Herinandro) |
---|---|---|---|---|---|---|---|---|---|---|---|
QPD3-0-8000-2 | DC | 8 | 2 | - | 11 | 9 | ±0.8 | 12 | 1.8 | SMA, NY | 2~3 |
QPD3-0-26500-2-S | DC | 26.5 | 2 | - | 3 (typ.) | 9 (typ.) | ±1.3 | ±8 | 2 (typ.) | SMA | 2~3 |
QPD3-0-40000-2-K | DC | 40 | 2 | - | 3 (typ.) | 9 (typ.) | ±1.3 | ±8 | 2 (typ.) | 2,92 mm | 2~3 |
QPD3-0-50000-2-2 | DC | 50 | 2 | - | 3 (typ.) | 9 (typ.) | ±1.3 | ±8 | 2 (typ.) | 2.4mm | 2~3 |
QPD3-0-67000-2-V | DC | 67 | 2 | - | 3 (typ.) | 9 (typ.) | ±1.3 | ±8 | 2 (typ.) | 1,85 mm | 2~3 |
QPD3-1-300-1-S | 0.001 | 0.3 | 1 | - | 1 | 20 | ±0.4 | ±4 | 1.35 | SMA | 2~3 |
QPD3-5-50-50-S | 0,005 | 0.05 | 50 | 50 | 0.6 | 15 | 0.3 | 2 | 1.35 | SMA | 2~3 |
QPD3-5-1000-50-S | 0,005 | 1 | 50 | 50 | 1 | 12 | 0.3 | 5 | 1.5 | SMA | 2~3 |
QPD3-10-500-1-S | 0.01 | 0.5 | 1 | 0.15 | 1.4 | 16 | 0.6 | ±6 | 1.6 | SMA | 2~3 |
QPD3-80-300-20-S | 0.08 | 0.3 | 20 | 1 | 1 | 18 | 0.4 | ±5 | 1.3 | SMA | 2~3 |
QPD3-100-200-K1-N | 0.1 | 0.2 | 100 | 10 | 0.5 | 18 | ±0.3 | ±3 | 1.25 | N | 2~3 |
QPD3-100-350-30-S | 0.1 | 0.35 | 30 | 2 | 0.8 | 20 | ±0.4 | ±4 | 1.25 | SMA | 2~3 |
QPD3-100-400-30-N | 0.1 | 0.4 | 30 | 2 | 0.6 | 18 | 0.5 | ±5 | 1.3 | N | 2~3 |
QPD3-100-400-50 | 0.1 | 0.4 | 50 | 5 | 0.6 | 18 | 0.6 | ±5 | 1.3 | N | 2~3 |
QPD3-100-800-1-S | 0.1 | 0.8 | 1 | 1 | 1.5 | 20 | 0.4 | ±5 | 1.35 | SMA | 2~3 |
QPD3-100-1000-30-S | 0.1 | 1 | 30 | 2 | 1.8 | 18 | 0.8 | ±8 | 1.35 | SMA | 2~3 |
QPD3-114-178-K3-N | 0.114 | 0.178 | 300 | 50 | 1 | 20 | 0.5 | ±6 | 1.3 | N | 2~3 |
QPD3-134-3700-30-N | 0.134 | 3.7 | 30 | 2 | 3.8 | 18 | 0.9 | ±10 | 1.5 | N | 2~3 |
QPD3-136-174-K3-N | 0.136 | 0.174 | 300 | 20 | 0.8 | 20 | ±0.3 | ±3 | 1.25 | N | 2~3 |
QPD3-138-960-50-N | 0.138 | 0.96 | 50 | 3 | 1.2 | 18 | ±0.6 | ±6 | 1.3 | N | 2~3 |
QPD3-200-250-30-S | 0.2 | 0.25 | 30 | 2 | 1 | 20 | 0.4 | ±4 | 1.25 | SMA | 2~3 |
QPD3-200-2000-30-S | 0.2 | 2 | 30 | 2 | 1.8 | 20 | 0.8 | ±8 | 1.3 | SMA | 2~3 |
QPD3-225-2500-20-S | 0.225 | 2.5 | 20 | 1 | 1.8 | 20 | 0.8 | ±8 | 1.4 | SMA | 2~3 |
QPD3-336-366-30-N | 0.336 | 0.366 | 30 | 2 | 0.6 | 20 | 0.3 | ±3 | 1.25 | N | 2~3 |
QPD3-380-470-K3-N | 0.38 | 0.47 | 300 | 20 | 0.8 | 20 | ±0.3 | ±3 | 1.25 | N | 2~3 |
QPD3-380-3800-10-N | 0.38 | 3.8 | 10 | 1 | 2 | 18 | ±0.8 | ±8 | 1.5 | N | 2~3 |
QPD3-380-40000-20-K | 0.38 | 40 | 20 | - | 4.5 | 17 | ±0.9 | ±10 | 1.7 | 2,92 mm | 2~3 |
QPD3-400-1000-30-S | 0.4 | 1 | 30 | 2 | 0.6 | 20 | 0.4 | ±5 | 1.3 | SMA | 2~3 |
QPD3-400-2000-30-S | 0.4 | 2 | 30 | - | 1.8 | 20 | ±0.8 | ±10 | 1.3 | SMA | 2~3 |
QPD3-400-6000-20 | 0.4 | 6 | 20 | 1 | 2.8 | 18 | 0.8 | ±8 | 1.5 | SMA, NY | 2~3 |
QPD3-433-30-N | 0.433 | 30 | 2 | 0.5 | 22 | 0.3 | ±3 | 1.2 | N | 2~3 | |
QPD3-440-900-60-N | 0.44 | 0.9 | 60 | 3 | 1 | 18 | 0.5 | ±6 | 1.35 | N | 2~3 |
QPD3-480-500-30-N | 0.48 | 0.5 | 30 | 2 | 0.3 | 20 | ±0.3 | ±3 | 1.2 | N | 2~3 |
QPD3-480-500-50-N | 0.48 | 0.5 | 50 | 3 | 0.3 | 20 | ±0.3 | ±3 | 1.2 | N | 2~3 |
QPD3-500-700-K15-S | 0.5 | 0.7 | 150 | 20 | 0.6 | 18 | 0.5 | ±6 | 1.3 | SMA | 2~3 |
QPD3-500-3000-30-S | 0.5 | 3 | 30 | 2 | 1 | 18 | 0.5 | ±5 | 1.3 | SMA | 2~3 |
QPD3-500-6000-30 | 0.5 | 6 | 30 | 2 | 2.8 | 18 | 0.8 | ±8 | 1.5 | SMA, NY | 2~3 |
QPD3-500-6000-K3-4 | 0.5 | 6 | 300 | - | 1.2 | 12 | ±0.5 | ±5 | 1.6 | 4.3-10 | 2~3 |
QPD3-500-8000-20-S | 0.5 | 8 | 20 | 2 | 2.2 | 17 | 1 | ±10 | 1.5 | SMA | 2~3 |
QPD3-500-18000-30-S | 0.5 | 18 | 30 | 5 | 2.1 | 18 | ±0.5 | ±5 | 1.45 | SMA | 2~3 |
QPD3-500-26500-30-S | 0.5 | 26.5 | 30 | 2 | 3 | 18 | ±0.6 | ±5 | 1.6 | SMA | 2~3 |
QPD3-500-40000-20-K | 0.5 | 40 | 20 | 2 | 4.3 | 18 | ±0.8 | ±9 | 1.7 | 2,92 mm | 2~3 |
QPD3-555-3400-30-N | 0.555 | 3.4 | 30 | 2 | 1 | 20 | ±0.7 | ±7 | 1.25 | N | 2~3 |
QPD3-600-6000-30 | 0.6 | 6 | 30 | 2 | 2.8 | 20 | ±0.8 | ±8 | 1.5 | SMA, NY | 2~3 |
QPD3-698-2700-30-N | 0.698 | 2.7 | 30 | 2 | 0.6 | 20 | ±0.4 | ±4 | 1.3 | N | 2~3 |
QPD3-698-6000-30-N | 0.698 | 6 | 30 | 2 | 2 | 18 | 0.8 | ±8 | 1.5 | N | 2~3 |
QPD3-700-1100-10-S | 0.7 | 1.1 | 10 | - | 1 | 20 | ±0.6 | - | 1.35 | SMA | 2~3 |
QPD3-700-4000-30 | 0.7 | 4 | 30 | 2 | 1.4 | 20 | ±0.8 | ±8 | 1.3 | SMA, NY | 2~3 |
QPD3-700-5000-30-N | 0.7 | 5 | 30 | 2 | 1.5 | 18 | ±0.8 | ±8 | 1.4 | N | 2~3 |
QPD3-800-1600-30-S | 0.8 | 1.6 | 30 | 2 | 0.6 | 20 | ±0.4 | ±4 | 1.3 | SMA | 2~3 |
QPD3-800-2500-K2-7 | 0.8 | 2.5 | 200 | - | 0.5 | 20 | 0.3 | 4 | 1.2 | 7/16 DIN | 2~3 |
QPD3-1000-2000-30-S | 1 | 2 | 30 | 2 | 0.8 | 20 | ±0.4 | ±4 | 1.25 | SMA | 2~3 |
QPD3-1000-3000-30-N | 1 | 3 | 30 | 2 | 1.2 | 20 | ±0.5 | ±5 | 1.3 | N | 2~3 |
QPD3-1000-18000-20-S | 1 | 18 | 20 | 0.5 | 1.5 | 17 | ±0.8 | ±7 | 1.7 | SMA | 2~3 |
QPD3-1000-26500-30-S | 1 | 26.5 | 30 | 2 | 2.1 | 16 | ±0.8 | ±7 | 1.7 | SMA | 2~3 |
QPD3-1100-1700-30 | 1.1 | 1.7 | 30 | 2 | 0.5 | 20 | 0.4 | ±4 | 1.25 | SMA, TNC | 2~3 |
QPD3-1500-6200-K15-N | 1.5 | 6.2 | 150 | 150 | 1 | 15 | ±0.5 | ±5 | 1.5 | N | 2~3 |
QPD3-2000-3000-20-S | 2 | 3 | 20 | 1 | 0.5 | 18 | 0.5 | ±5 | 1.3 | SMA | 2~3 |
QPD3-2000-4000-20-S | 2 | 4 | 20 | 1 | 0.6 | 20 | 0.3 | ±5 | 1.3 | SMA | 2~3 |
QPD3-2000-8000-20 | 2 | 8 | 20 | 1 | 1.2 | 18 | 0.5 | ±6 | 1.4 | SMA, NY | 2~3 |
QPD3-2000-9000-30-S | 2 | 9 | 30 | 2 | 1.5 | 18 | ±0.5 | ±5 | 1.5 | SMA | 2~3 |
QPD3-2000-18000-20-S | 2 | 18 | 20 | 1 | 1.6 | 16 | 0.6 | ±10 | 1.7 | SMA | 2~3 |
QPD3-2000-26500-30-S | 2 | 26.5 | 30 | 2 | 2 | 17 | ±0.7 | ±7 | 1.6 | SMA | 2~3 |
QPD3-2100-8400-20-N | 2.1 | 8.4 | 20 | 1 | 1.6 | 18 | 0.6 | ±6 | 1.15 | N | 2~3 |
QPD3-3400-3800-30-N | 3.4 | 3.8 | 30 | 2 | 0.5 | 20 | ±0.5 | ±5 | 1.25 | N | 2~3 |
QPD3-4950-4970-20-S | 4.95 | 4.97 | 20 | 1 | 0.5 | 20 | ±0.4 | ±4 | 1.25 | SMA | 2~3 |
QPD3-6000-10000-20-S | 6 | 10 | 20 | 1 | 1.2 | 18 | 0.6 | ±6 | 1.5 | SMA | 2~3 |
QPD3-6000-18000-20-S | 6 | 18 | 20 | 1 | 1.2 | 18 | 0.6 | ±6 | 1.5 | SMA | 2~3 |
QPD3-6000-26500-30-S | 6 | 26.5 | 30 | 2 | 1.4 | 18 | ±0.6 | ±7 | 1.6 | SMA | 2~3 |
QPD3-6000-40000-20-K | 6 | 40 | 20 | 2 | 1.8 | 18 | ±0.8 | ±9 | 1.7 | 2,92 mm | 2~3 |
QPD3-6000-50000-20-2 | 6 | 50 | 20 | 1 | 2.4 | 18 | ±0.9 | ±11 | 1.8 | 2.4mm | 2~3 |
QPD3-7000-8000-20-S | 7 | 8 | 20 | 1 | 1 | 20 | 0.4 | ±4 | 1.3 | SMA | 2~3 |
QPD3-8000-12000-20-S | 8 | 12 | 20 | 1 | 1 | 18 | 0.5 | ±5 | 1.4 | SMA | 2~3 |
QPD3-9000-11000-20-S | 9 | 11 | 20 | 1 | 0.8 | 18 | 0.5 | ±5 | 1.4 | SMA | 2~3 |
QPD3-12000-13000-60-S | 12 | 13 | 60 | 60 | 0.8 | 20 | ±0.3 | ±4 | 1.4 | SMA | 2~3 |
QPD3-16000-18000-20-S | 16 | 18 | 20 | 1 | 0.8 | 18 | 0.5 | ±5 | 1.4 | SMA | 2~3 |
QPD3-17000-32000-20-K | 17 | 32 | 20 | 1 | 2 | 15 | 0.8 | ±10 | 1.8 | 2,92 mm | 2~3 |
QPD3-18000-26500-30-S | 18 | 26.5 | 30 | 2 | 1.4 | 18 | ±0.5 | ±6 | 1.6 | SMA | 2~3 |
QPD3-18000-40000-20-K | 18 | 40 | 20 | 2 | 1.8 | 18 | ±0.7 | ±8 | 1.7 | 2,92 mm | 2~3 |
QPD3-18000-50000-20-2 | 18 | 50 | 20 | 1 | 2.4 | 18 | ±0.9 | ±11 | 1.8 | 2.4mm | 2~3 |
QPD3-24000-44000-20-2 | 24 | 44 | 20 | 1 | 2 | 20 | ±0.8 | ±9 | 1.7 | 2.4mm | 2~3 |
QPD3-26000-31000-20-K | 26 | 31 | 20 | 1 | 1.5 | 16 | 0.6 | ±6 | 1.5 | 2,92 mm | 2~3 |
QPD3-26500-40000-20-K | 26.5 | 40 | 20 | 2 | 1.8 | 18 | ±0.6 | ±7 | 1.7 | 2,92 mm | 2~3 |
QPD3-26500-50000-20-2 | 26.5 | 50 | 20 | 1 | 2.4 | 18 | ±0.8 | ±10 | 1.8 | 2.4mm | 2~3 |